Methodology: Rice Husk Plywood Production

Methodology: sift Husk Plywood Production

Collection of materials
Rice husks leave be imperturbable from the Tria Rice Mill. A particular kind of glue or called as formaldehyde-based resin will be allotted as the main agent in the mixture gluing process as well as the wooden frameworks which will be all set for the molding course.

Sugar-Reduction
The collected rice husks will be pre-treated with hot water at 80°C to reduce its sugar content that could feature poor rice husks compatibility before it will be assembly line dried to remove excess moisture.

Blending Process
The amount of materials necessary for the rice husk plywood production will be so weighed and mixed in the mixing bowl match to the mix ratio of rice husk and resin which is correspond by 3:1. The mats will be hand cover with polythene sheet to prevent the sticking of the board.





Pre-Pressing
The presses will be used to manufacture molded rice husk plywood which are not platen press, but are press molds fit with a heated die that shapes the resinated rice husks into the ideal product. The molded rice husk board will be pressed within the total press time of cardinal minutes for single- source presses and up to six minutes for multi- opening processes. Presses will be heated using steam at 149°C to 182°C.

Cooling Process
After pressing, the boards will be cooled at normal temperature all night long prior to stacking. The organize rice husk plywood will be then sanded and trimmed to final dimensions; any other finishing trading operations will be done.If you want to get a effective essay, order it on our website: Orderessay



If you want to get a full essay, wisit our page: write my essay .